研究／開発

Kodatunoを用いた研究／開発の例です．掲載してもいい資料がありましたらご連絡ください．

投稿論文

• Development of a CAM System with Linear Servo Motor for Automation of Metal Hammering: Hidetake Tanaka, Kaoru Hoshino, Naoki Asakawa, Key Engineering Materials, Vol. 625, p. 360-365, (2015)
• 曲面パラメータに基づいた高精度高効率工具経路生成−一般曲線への適用−: 高杉敬吾, 浅川直紀, 森本喜隆, 浜松央弥, 精密工学会誌, Vol.81, No.10, pp.974-978, (2015)
• 工具経路生成時間短縮法の開発―加工点依存プログレッシブメッシュ表現の適用―: 鬼頭亮太, 高杉敬吾, 浅川直紀, 岡田将人, 精密工学会誌, Vol.81, No.4, pp.376-383, (2015)
• A Surface Parameter-Based Method for Accurate and Efficient Tool Path Generation: K. Takasugi, N. Asakawa, Y. Morimoto, Int. Jour. of Automation Technology, Fuji Technology press Ltd., Vol.8, No.3, pp.428-436, (2014)
• Development of CAM System for 3D Surface Machining with CNC Lathe: K. Takasugi, Y. Morimoto, K. Nakagaki, Y. Kaneko, J. of Advanced Mechanical Design, Systems, and Manufacturing, Vol.8, No.14, (2014)
• Development of Free Curved Plate Thickness Measurement System - Improvement of Interpolation for Continuous Path -: Y. Okugawa, N. Asakawa, M. Okada, JAMDSM, doi: 10.1299/jamdsm.2014jamdsm0047, Vol.8, No.4, pp.1-8, (2014)
• Development of a System for Measuring the Thickness of Free Curved Plates - Measurement Posture Planning Using C-Space -: Y. Okugawa, N. Asakawa, M. Okada, Int. Jour. of Automation Technology, Fuji Technology press Ltd., Vol.7, No.5, pp.593-600, (2013)
• Development of a Forging Type Rapid Prototyping System (Relationship Between Hammering Direction and Product Shape): K. Takasugi, H. Tanaka, M. Jono, N. Asakawa, Int. Jour. of Automation Technology, Fuji Technology press Ltd., Vol.6, No.1, pp.38-45, (2012)
• Development of CAM System Using Linear Servo Motor to Automate Metal Hammering - A Study on Forging-Type Rapid Prototyping System -: Hidetake Tanaka, Soichiro Naka, and Naoki Asakawa, International Journal of Automation Technology, Vol.6, No.5 pp. 604-610, (2012)
• 塑性変形型ラピッドプロトタイピングに関する研究（リニアシャフトモータのハンマリング装置への適用）: 田中秀岳，近藤祐太，中宗一郎，浅川直紀, 日本機械学会論文集Ｃ編，Vol. 78, No. 790 pp. 2312-2321, (2012)
• 薄板のインクリメンタルハンマリング張出し成形に関する研究: 高杉敬吾, 浅川直紀, 田中秀岳, 岡田将人, 日本機械学会論文集（Ｃ編）, Vol.78, No.795, pp.3759-3767, (2012)

国際会議

• A surface parameter-based method for accuracy and efficient tool path generation (application of general curve on parametric space): K. Takasugi, N. Asakawa, K.Yamamoto, Proc. of the 15th Int. Conf. of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2015), pp.357-358, (2015)
• Development of CAM System for 3D surface Machining with CNC Lathe -Improvement of Machining Accuracy with On-Machine Measurement-: Keigo TAKASUGI, Yoshitaka MORIMOTO, Naohiko SUZUKI and Yoshiyuki KANEKO, Proc. of LEM21, (2015)
• Development of Tool Path Generation Method with Lower Calculation Cost -Simplification of 3D model in Projection method-: T. Shimizu, N. Asakawa, K. Takasugi, Proc. of 19th Int. Conf. on Mechatronics Technology (ICMT2015), B05, (2015)
• Automation of Gas Cutting by an Industrial Robot − Tool Path Generation Using Image Processing −: K. Yamamoto, N. Asakawa, M. Okada, Proc. of the 15th Int. Conf. on Precision Engineering (ICPE2014), pp.716-717, (2014)
• Automation of Metal Hammering by Linear Servomotor −Improvement of Form Accuracy by Form Measurement−: H. Tanaka, K. Hoshino, N. Asakawa, Proc. of the 15th Int. Conf. on Precision Engineering (ICPE2014), pp.790-791, (2014)
• Development of a Forging Type Rapid Prototyping System - Influence of Local Heating by Gas Burner and Tool Path on Formability -: K.Yamamoto, N.Asakawa, M. Okada, K. Takasugi, H. Tanaka, Proc. of 18th Int. Conf. on Mechatronics Technology (ICMT2014), ID99, (2014)
• Development of a Forging Type Rapid Prototyping System (The recent summary): N.Asakawa, H. Tanaka, K. Takasugi, K.Yamamoto, M. Okada, Proc. of 18th Int. Conf. on Mechatronics Technology (ICMT2014), ID102, (2014)
• DEVELOPMENT OF CAM SYSTEM FOR 3D SURFACE MACHINING WITH CNC LATHE (TOOL PATH GENERATION CONSIDERING ACCELERATION): K. Takasgui, Y. Morimoto, K. Nakagaki and Y. Kaneko, Proc. of IMECE, (2014)
• Development of Orthros, Free Curved Plate Thickness Measurement System -Acquisition of accurate and complete shape data-: Y. Okugawa, N. Asakawa, M. Okada, Proc. of 18th Int. Conf. on Mechatronics Technology (ICMT2014), ID60, (2014)
• Development of orthros, free curved plate thickness measurement system -In case of textured surface-: Y. Okugawa, N. Asakawa, M. Okada, Proc. of the 15th Int. Conf. on Precision Engineering (ICPE2014), pp.273-274, (2014)
• Development of Tool Path Generation Method with Lower Calculation Cost: R.Kito, K. Takasugi, N. Asakawa, M. Okada, Proc. of the 15th Int. Conf. on Precision Engineering (ICPE2014), pp.718-719, (2014)
• Development of a CAM System with Linear Servo Motor for Automation of Metal Hammering: K Hoshino, H. Tanaka, and N. Asakawa, Proc. of Asian Symposium for Precision Engineering and Nanotechnology 2013, Taipei, Taiwan, (2013)
• Development of Orthros, an Evaluation System for Free Curved Plate Thickness with a Robot -Selection of Representative Points for Appropriate Interpolation-: Y. Okugawa, N. Asakawa, M. Okada, The 7th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), pp.147-152, (2013)
• Development of Orthros, Free Curved Plate Thickness Measurement System -Generation of Path Considering Continuity of Postures: Y. Okugawa, N. Asakawa, M. Okada, Proc. of 17th Int. Conf. on Mechatronics Technology (ICMT2013), pp.132-136, (2013)
• Development of Desktop Size Metal Hammering System by Use of Linear Motor -Formability of Sheet Metal by Linear Servo Hammer-: Hidetake Tanaka, Soichiro Naka, and Naoki Asakawa, Proc. of Mechatronics2012, Linz, Austria, (2012)
• Development of Orthros, an Evaluation System for Free Curved Plate Thickness with a Robot -Generation of the Path Considering Collision-: Y. Okugawa, N. Asakawa, M. Okada, Key Engineering Materials, Trans Tech Publications (ICPE2012), Vol.523-524, pp.404-409, (2012)
• Development of a CAM System with Linear Servo Motor for Automation of Metal Hammering: Soichiro NAKA, Hidetake TANAKA, and Naoki ASAKAWA, Proc. of ICTP2011 International Conference on Technology of Plasticity, Aachen, Germany, (2011)
• Development of Platform-Independent Open CAM Kernel: K. Takasugi, T. Kumasaka, N. Asakawa, Proc. of the 6th Int. Conf. on Leading Edge Manufacturing in 21st Century, pp.3354, (2011)
• Development of a Forging Type Rapid Prototyping System (Improvement of Accuracy of a Product Shape Considering Hammering Direction): K. Takasugi, H. Tanaka, F. Murata, M. Jono, N. Asakawa, Proc. of 14th Int. Conf. on Mechatronics Technology, pp.217-220, (2010)
• Development of desktop size metal hammering system by use of liner motor -Basic concept of hammering force control -: Hidetake Tanaka, Yuta Kondo, Kazuhisa Yanagi, and Naoki Asakawa, Proc. of Mechatronics2010, Zurich, Switzerland, (2010)

国内会議

• オープンソースCAMによるリニアモータを用いた鍛金加工の自動化: 田中秀岳，浅川直紀, 精密工学会2014年度秋季大会，pp667-668, (2014)
• 曲面パラメータを用いた高速・高精度工具経路生成法: 高杉敬吾，浅川直紀，森本善隆, 2014年度精密工学会春季大会学術講演会講演論文集, (2014)
• OpenCAMカーネル”Kodatuno”の開発(NURBS表現による実装): 高杉敬吾，浅川直紀, 日本機械学会北陸信越支部第50期総会・講演会講演論文集, (2013)
• 非円形旋削加工用CAM システムの開発: 高杉敬吾，森本喜隆，中垣勝敬，金子義幸, 2013年度精密工学会秋季大会学術講演会講演論文集, (2013)
• タグチメソッドを応用した成形品の形状評価-リニアモータを用いた鍛金の自動化に関する研究-: 渡邉翔，田中秀岳，柳和久, 精密工学会2012年度秋季大会，pp467-468, (2012)

その他

• OpenCAMカーネルKodatunoプロジェクト: 浅川直紀, オープンソースアンカンファレンス2016金沢, (2016)

[WelcomePage]

http://www-mm.hm.t.kanazawa-u.ac.jp/